Als u deze e-mail in tekstformaat ontvangt, zonder afbeeldingen, klik hier!
 
   
  
 

Tips For Designers

20/04/2017

 
 


KISS LoRa – E&A 2017 gadget

Alcom is de hoofdsponsor van de Kiss LoRA. Samen met Microchip sponsort  Alcom
volledig alle core-technologieën zoals de LoRa module, de microcontroller en het batterijlaadcircuit.
Daarnaast sponsort Alcom ook de Humidity Sensor. Voor al uw core-technologieën biedt
Alcom, als uw design-in distributeur, een “one stop shop”.

Bezoek onze stand 7B064.

Registreer nu hier voor een bezoek aan de beurs en reserveer een gadget.

Logo-KISS-LoRa-300x148.jpg        subscribe now image

 
M2M & WIRELESS MODULES
 

 
Secure, Connected System-On-Module
 

CONNECTCORE for i.MX6UL

Intelligent and connected embedded system-on-module based on the NXP i.MX6 UL, with turnkey Linux software support in a stamp-sized form factor (29mmx29mmx3.5mm).

  • Stamp-sized, secure, connected System-on-Module platform
  • NXP i.MX6UL-2, Cortex-A7 @ 528 MHz
  • Up to 2 GB NAND flash, up to 1 GB DDR3
  • Patent-pending low-profile Digi SMTplus™ form factor
  • Integrated Microcontroller Assist™ for 30 ľA ultra-low power modes
  • Pre-certified 802.11a/b/g/n/ac + Bluetooth 4.2 option
  • Integrated dual 10/100 Ethernet connectivity
  • Exclusive Digi TrustFence™ embedded device security framework
  • Turnkey and royalty-free embedded Linux software platform
  • Industrial operating temperature and reliability

 
 

 
Industrial L3 Managed PoE Switch

The JetNet 7310G is a pure Gigabit Managed Switch with 8 ports Gigabit Ethernet plus IEEE 802.3at PoE/PSE function, and 2 Gigabit SFP for Gigabit Ethernet fiber connection. The JetNet 7310G is especially designed for IP Surveillance market with the NEMA-TS2 characteristics and EN50121-4 compliance.


Features:

  • Gigabit Wire Speed L3 routing performance
  • Non-Blocking, High Speed Network Switching Fabric
  • Network Redundancy- MSR (Multiple Super Ring), ITU-T G.8032 ERPS, RSTP, MSTP, Super Chain
  • Fully Device Management- SNMP v1/v2c/v3, RMON, Web UI, Telnet and Local Console
  • Friendly Device and Network Topology recovery utility- Korenix View, Korenix NMS
  • Advanced Cyber Network Security- MAC security, IEEE 802.1x Port Based access control, IEEE 802.1x Radius Server authentication, 802.1x MAB, Distributed Denial of Service, IP Source Guard, Denial of ARP Inspection
  • Hardware Watchdog for System Auto-Recovery
  • High Level Electromagnetic interface immunity
  • IP Surveillance solution with NEMA-TS2 characteristic
  • Railway Track Side EN50121-4 compliance
  • High Operating Temperature -40~75?
  • Redundant wide range power input DC 45~57V

 
 

 
Multi Protocol Wireless Mini PCI Card

The RS9113 USB Half Mini Card is based on Redpine Signals RS9113 ultra-low-power Convergence SoC. It offers dual-band 1x1 802.11n, dual-mode Bluetooth 4.0 and ZigBee 802.15.4 in a single device over USB in a Mini PCIe Card form factor. It is an ideal multi-protocol wireless expansion board for IoT Gateways.
The software architecture for the USB Half Mini Card, n-LinkŽ, realizes a host-based architecture where the necessary MAC and PHY layers are implemented in the device to support high-performance, long range WLAN, Bluetooth and ZigBee applications in a 32-bit host processor over USB interface.
Driver Support is available for Linux, Android, Win CE7, WEC2013, Windows 7, Windows 10 and Windows 10 IoT operating systems.

 
 

 
Modules for LTE-M / NB-IoT, 4G, 3G, and 2G Networks

Essential Connectivity versus integrated Application Processor

The industrial-grade common flexible form factor (CF3™) enables OEMs and System Integrators to build their connected products on the most scalable module platform in the world. CF3™ modules provide one size, one design, one future-proof footprint across any LPWA, 4G, 3G, 2G mobile network and are available in two product series:

HL Series
Enables you to securely connect any IoT application to any cellular network in the world and remotely upgrade devices in the field.

WP Series
Enables you to build a connected product on a single module with integrated application processing, GNSS receiver, and cellular modem.

 

 
 

 
New interlocking modular antenna system

The CMM200 is a 2x8-element dual-polarization antenna sub-array module which can be used to construct the passive radiator section of a Massive MIMO system capable of operating in the 5-6GHz band. The CMM200 will maintain a constant spacing between elements when attached to other CMM200 modules using its proprietary threadless fastening scheme. Each module can be mated with another module on either the long or short side. This property allows for a large number of array configurations to be easily realized.

 
DISPLAY & EMBEDDED COMPUTING
 

 
6U CompactPCI 6th Generation IntelŽ Core™ i7/CeleronŽ Processor Blade

The ADLINK cPCI-6630 Series is a 6U 4/8 HP CompactPCIŽ processor blade featuring a 6th generation IntelŽ Core™ i7/CeleronŽ processor and Mobile IntelŽ HM170 PCH with DDR4-2133 non ECC memory up to 32GB via 2 SODIMM sockets. The 6th generation IntelŽ Core™ i7 processor (formerly "Skylake") boosts the cPCI-6630’s performance by 10% compared to the previous generation product (cPCI-6530BL). Graphics support for the cPCI-6630 Series is integrated on the IntelŽ processor and supports hardware-accelerated H.265 decoding and encoding to brings more efficient and smarter compression for video applications.

Features:

  • Quad-core 6th Gen IntelŽ Core™ i7/CeleronŽ processor
  • Up to 32GB DDR4-2133 memory via two SO-DIMMs
  • 5V power input only
  • Legacy IO supported: PS/2, PMC, CompactFlash
  • Optional SEMA 3.0 support

 
 

 
21" Medical Panel PC

Powered with IntelŽ 6th Gen Core-i/Celeron processor, HID-2132 provides high computing ability and low power consumption, allowing hospitals to run medical related applications efficiently yet at the same time save energy. HID-2132 supports Full HD display and P-CAP multi-touch up to 10 points, giving users an extraordinary visual and touch control experience. HID-2132 is designed with 4*USB 3.0, which transfer data about 10 times faster than USB 2.0, 1*RS-232/422/485, selectable by BIOS and 1*RS-232 to cater to installer’s different needs as well as 2*GLAN, offering speedy data transaction.


Features:

  • Support IntelŽ Skylake Core-i or Celeron CPU
  • Full HD Display & 10 Point P-CAP Touch
  • 4*USB3.0, 1*RS-232/422/482, 1*RS-232, 2*GLAN
  • Isolated USB/COM/LAN Ports
  • LED Reading Light Bar
  • Optional RFID/NFC/SCR/MSR/Wifi/BT Module, Internal Backup Battery Module
  • Optional Headset & 1D Barcode Scanner
  • Front Panel IP65 Rating, Anti-Microbial Finish
  • UL60601-1 4th Edition/CE/FCC Class B

 
 

 
First COM Express Type 7 modules with IntelŽ XeonŽ D processors

Based on the world-leading COM Express Basic standard form factor (95 x 125 mm), the modules feature 10 Gigabit Ethernet interfaces, 32 PCIe lanes and headless server performance currently with up to 16 server cores and 48 gigabytes of DDR4 ECC RAM. Examples of target applications for the new Server-on-Modules are industrial automation, storage and networking appliances as well as modular server designs and base stations for telecom carriers, service providers‘ server farms as well as cloud, edge and fog servers for IoT and Industry 4.0 applications.

Features:

  • Up to IntelŽ XeonŽ D 1577 with 16 Cores
  • 2x 10 Gigabit Ethernet KR Interface
  • 32x PCI Express lanes
  • Up to 16 processor cores
  • Up to 24MByte Cache with Intel Cache Allocation Technology
  • Industrial grade variants

 
 

 
picoITX Base Board Single Board Computer

The picoITX Base Board is universally applicable for ARM computer modules according to the DHCOM standard. In combination with DH modules, it is a flexible and a lower-cost SBC (single board computer).

Features:

  • BSPs for Linux, Android and Windows CE
  • 1x Ethernet 10/100Mbit
  • 2x USB Host 2.0, 1x USB OTG 2.0
  • 1x RS232 (Rx / Tx / Rts / Cts) / alternatively RS485 is possible1x RS232 (Full Function)
  • 1x UART (Tx / Rx)
  • 1x CAN, 1x I2C, 1x SPI
  • 24bit RGB Display Interface
  • 4-wire resistive touch-screen
  • 1x PWM, 4x IOs,4x GPIOs
  • 1x Interrupt highest priority
  • 2x Optocoupler
  • 2x Open collector
  • 1x “Run” LED, 1x “Status” LED
  • 1x Battery connection for date and time back-up

 
 

 
Hard- & Software for CAN bus applications

The cables from PEAK can be used to set up a CAN bus and are specially designed to be used in a CAN environment.

On the PCAN-LIN module, the field busses and the power supply are connected together via a D-Sub plug. However, for some applications a separate access to the LIN components is necessary.



CAN Connection Cable
PCAN-Cable 1&2

CAN Cable for Test and Measurement Setups
PCAN-Cable 3

CAN-OBD-2 Diagnostics Cable
PCAN-Cable OBD-2

CAN-J1939 Adapter Cable
PCAN-Cable J1939

Pre-configured Cable Set for PCAN-USB Pro FD
LIN Connection Cable for PCAN-USB Pro FD

Pre-configured Cable Set for the PCAN-LIN Module
Lin Connection Cable for PCAN-LIN

 
 

 
High-Brightness/Open-Frame Displays (3.5"- 21.5")

Brightness enhancement services

  • Up to 1500 nits for Sunlight Readable
  • Quick evaluation / Development

 
 

 
7" All-In-One In-Vehicle Terminal

The MT7000 is a terminal dedicated to automotive and transportation applications, combining a friendly and intuitive interface with in-vehicle connectivity and power.

Features:

  • 7” intuitve PCT touch
  • OBDII/ SAE J1939 supported
  • GPS with dead reckoning functon
  • Seamless communicaton
  • Smart power management with backup batery

 

Have a question?  We would like to hear it.
Either send us an email or give us a call and one of our Technical Sales Engineers will be happy to assist you.  It is Alcom electronics’ aim to keep its subscribers up-to-date with products, services and events related to their professional interest.
 
T4D - Tips For Designers - is a monthly e-news magazine which contains Hardware Electronic Component & Application concepts for electronics engineers and design managers. T4D also features embedded Wireless - Display - Connectivity - Computing solutions for system designers & integrators.
 


Alcom Belgium - Singel 3 - 2550 Kontich

Tel.: +32 (0)3 458 30 33 - Fax: +32 (0)3 458 31 26

www.alcom.be - info@alcom.be

 

Alcom Netherlands - Rivium 1e straat 52 - 2909 LE Capelle a/d IJssel

Tel.: +31 (0)10 288 25 00 - Fax: +31 (0)10 288 25 25

www.alcom.nl - info@alcom.nl


 
 
Send to a friend >
 
 
privacy policy | Deze e-mail werd verstuurd naar ALNVerkoop@alcom.nl. | Uitschrijven - Profiel update

Addemar