Als u deze e-mail in tekstformaat ontvangt, zonder afbeeldingen, klik hier!

Tips For Designers




Ultra HD Video Converter & Image Processor

AverLogic’s AL 362 is a fully programmable 4K2K Ultra HD video processor for Quad View / Multiple Display / TV Wall applications. The multi-AV Stream System-on-Chip (SoC) supports Flexi-Port and multiple stream inputs with multiple graphics & video formats, as well as scaling, overlaying, alpha-blending, etc. It can be used for most of the video conversion and image processing applications.

  • Fully programmable 4K UHD Video Processor.
  • Multi-Video Converter & Mixer.
  • 4K2K/60p Video Scale, PiP, PoP, PaP and Quad output.
  • 4K2K Video crop/split for Twin, Trinity and Quad output.


RF Power Amplifier IC

The CMX901 is a three stage high-gain and high efficiency RF power amplifier. The device is ideally suited for use in VHF and UHF frequency bands up to 950MHz. The first and second stages of the amplifier operate in a class-A and class-AB mode respectively, and the third stage operates in a class-C mode for maximum efficiency.

Key Benefits:

  • Wide operating frequency range 130MHz to 950MHz
  • Power added efficiency 60% (VHF)
  • Power gain up to 40dB
  • 1W to 2.5W output power
  • Single polarity supply voltage 2.5V to 6V
  • Small 28 pin WQFN package


MCUs combine battery friendly LCD drive with Core Independent Peripherals and Intelligent Analog 

PIC16(L)F191XX microcontrollers offer eXtreme Low-Power (XLP) LCD drive coupled with Core Independent Peripherals and Intelligent Analog. They are especially suited for battery powered LCD applications due to an integrated charge pump, high current I/O drive for backlighting, and battery backup of the Real Time Clock/Calendar (RTCC). Active clock tuning of the HFINTOSC provides a highly accurate clock source over voltage and temperature. The family also features new 12-bit ADC2 automating Capacitive Voltage Divider (CVD) techniques for advanced touch sensing, averaging, filtering, oversampling and automatic threshold comparison.


High Performance 8-bit MCUs with DMA support

The PIC18F “K42” family combines an extensive array of Core Independent Peripherals (CIPs), high-resolution analog, on-chip Direct Memory Access (DMA) and vectored interrupts for fast processing. The DMA controller enables data transfers between memory space and peripherals without Core Processing Unit (CPU) involvement, improving system performance and lowering power consumption.


  • C Compiler Optimized RISC Architecture
  • Operating Speed:
    - Up to 64 MHz clock input
    - 62.5 ns minimum instruction cycle
  • Two Direct Memory Access (DMA) Controllers
    - Data transfers to SFR/GPR spaces from either Program Flash Memory, Data EEPROM or SFR/GPR spaces
    - User-programmable source and destination sizes
    - Hardware and software-triggered data transfers
  • System Bus Arbiter with User-Configurable Priorities for Scanner and DMA1/DMA2 with respect to the main line and interrupt execution
  • Vectored Interrupt Capability
    - Selectable high/low priority
    - Fixed interrupt latency
    - Programmable vector table base address


WGM110 Wizard Gecko Wi-Fi Module

The WGM110 Module integrates all of the necessary elements required for an IoT Wi-Fi application, including an 802.11b/g/n radio, integrated antenna, certifications, a microcontroller, Wi-Fi and IP stacks, an HTTP server, and multiple protocols, such as TCP and UDP. WGM110 can act as a Wi-Fi client or be used as a Wi-Fi access point, making the provisioning of the device as easy as surfing on the web.

Starter Kit


Cost-effective SMD LEDs with high color quality

Bridgelux SMD LED products (2835, 3030, 5050) offer exceptional performance and color quality all in a highly reliable, cost effective, compact package.  These LEDs offer high quality light in a wide range of CCT and CRI options, and are well suited for both commercial and residential lighting applications.  All our SMD products come in industry standard package sizes and follow ANSI binning standards allowing for seamless design in, decreasing time to market.    


  • High efficacy and lumen per dollar
  • Industry standard form factors and footprint
  • ANSI compliant color bins
  • Excellent lumen maintenance
  • Broad range of CCT and CRI configurations


CXM-9 COB White LED Arrays reach 97 CRI


  • High lumen output and efficacy typical
  • Over 1,780 lm, 146 lm/W @ 3000K, 80CRI, TJ = 85║C
  • Over 2,025 lm, 168 lmW @ 5000K, 70CRI, TJ = 85║C
  • CCT range 2700K, 3000K, 3500K, 4000K, 5000K and 6500K
  • 80 or 90 CRI min. up to 95 min. in warm white

Luminus Chip-on-Board (COB) LED series offers a complete lighting class solution designed for high performance illumination applications. The selection covers a wide lumen range from less than 400lm to over 10,000lm, all major color temperatures and can deliver color rendering greater than 97 at 2700K and 3000K and R9 equal to 95. These breakthroughs allow illumination engineers and designers to develop lighting solutions with maximum efficacy, brightness and overall quality.


Product Brief


Hyperion family of high-power horticultural LED grow lights

High-Power LED Grow Light Directly Replaces Sodium Lamps & Cuts Energy by 40%

Key features:

  • 1000 Ámol and 1600 Ámol product models
  • Equivalent to 600w and 1000w sodium grow lights
  • 40% energy saving versus sodium
  • Up to 2.74 Ámol /W efficiency
  • IP67 rated for full pressure power wash cleaning
  • Range of proven spectrums for different applications
  • 7 year guarentee/ 35,000 hours with >95% light output


Highspeed PCB Connectors for COM Express Pinout Type 7

The 3.0 release of the successful COM Express computer-on-module standard includes a new pinout type. This enables a faster data transfer rate of up to 10 Gbps, thereby expanding the applicability of COM Express in terms of server applications. Of course, the PCB connectors required to connect the baseboard and the COM module need to meet these increased requirements.


  • Meets PICMG COM Express« and SFF-SIG CoreExpress« requirements
  • For applications with 10+ Gbps
  • Compatible with all popular connectors
  • Robust connector design
  • Integrated pick-and-place area
  • Packed in tape and reel

Product overview

Product sheet


Ultra-Miniature Watch Crystal for IoT Applications

IQD's 32.768kHz IQXC-25 watch crystal is ideal for applications where space on a PCB is at a premium. It measures just 2.0 x 1.2mm and with a height of only 0.6mm. It is housed in a 2-pad ceramic package with an operating temperature range of -40 to +85 degrees C and a standard frequency stability coefficient of -0.03 ▒0.01ppm/degrees C▓. Standard frequency tolerance is ▒20ppm however ▒10ppm can also be manufactured upon request whilst the load capacitance can be specified at 12.5pF, 9pF, 7pF or 6pF.

The IQXC-25 is ideal for the many applications related to the Internet of Things (IoT) where accurate time keeping and non-volatile data storage is required via a Real Time Clock (RTC). These include battery management, Bluetooth, POS terminals, smart meters, wearables and Wi-Fi.


Planar Transformer Continues Cost-Down Initiative

The PH08xxCNL series is our most cost effective line of planar transformers to date. The PH08xxCNL series is an evolution of the planar technology to better suit today’s customer needs for performance, form factor, and price.

  • Power Rating: Up to 160W
  • Height: 9.1mm to 9.6mm Max
  • Footprint: 24.7mm x 21.6mm Max
  • Input Voltage Range: 18V-76V
  • Insulation Level: FUNCTIONAL
  • Frequency Range: 200kHz to 700kHz
  • Isolation Voltage: 1500 VDC
  • Operating Temperature Range: -40░C to +125░C
  • RoHS Compliant
  • Patent Pending


New Inductor Series With More Footprint Options & Increased Energy Storage

Pulse introduced its new high density line of shielded power inductors. The PA4318.XXXNL – PA4322.XXXNL series offer fully shielded construction for EMI and sizes ranging from 5.1 x 5.1 x 3.1 to 12 x 12 x 10mm. These 5 new power inductor platforms offer increased energy storage & more space critical design footprint options.


Appliance Outlet with Light Pipes for Status Display

SCHURTER improves upon a classic product: the new 6600-5 series IEC outlets are available with integrated light pipes. An intelligent, space and cost-saving solution for PDUs used in data centers and other multi-distributed power applications.

Technical features:

  • Ratings IEC 10 A / 250 VAC; 50 Hz
  • Ratings UL/CSA 15 A / 250 VAC; 60 Hz
  • With one, two or without integrated light pipes for status display
  • Compatible for V-Lock cord retention and other systems with side latches
  • Operation temperature -25 ░C bis 70 ░C
  • Snap-in mounting and PCB terminals


Energy conservation by dimmed LED lighting

The Friwo DIMMboxes or Light Control Box offer technically advanced solutions in a slim design of 21 x 30 x 153 mm (H x B x L). The DIMMboxes allow flicker-free dimming both in constant-current mode (CC) as well as in constant mode (CV) by a pulse width modulation (PWM) with a frequency of 600 Hz. With the Light Control Box, designed for CC mode, lighting control is effected by linear lowering of the output current. Both systems offer a control via DALI/PUSH-DIM or 1 - 10 V signal. The Light Control Box also comes with a PWM input for the connection of external sensors like motion or brightness sensors. An auxiliary voltage of 12 V for the sensors is also provided.


Wireless Dimming Controller

The CTL-ENOC-XX is a self-contained, programmable wireless 0-10V dimming controller that enables one or more Inventronics LED drivers to be controlled by wall switches, dimmers, occupancy and daylight  sensors that use the EnOcean« wireless standard.


  • Controls 0-10V Dimming Input of One or More Inventronics LED Drivers
  • Compatible with EnOcean« Wireless Devices Including Rocker-Pad Switches, Daylight and Occupancy Sensors
  • Uses Driver Dim-to-Off Capability to Eliminate AC Switch or Relay
  • Simple 3-Wire Connection to an Inventronics Driver Includes Power
  • Low Standby Power = 0.5 W
  • Programmed Using a PC & the EnOcean Navigan Wireless Commissioner
  • Convenient Mounting Options: Outside a Junction Box or Luminaire Secured by a Single Nut, or Inside a Luminaire Secured by a Bracket


Medical AC-DC Adapters from 7.5W up to 30W

The units meet the most stringent energy efficiency standards such as DOE Level VI or Code of Conduct (CoC), even for medical technology. In addition to the units' high efficiency, the minimum standby losses are crucial. Maximum safety is guaranteed by double locking of the housings, minimum leakage currents of =10ÁA and protection class 2x MOPP.
The individual units of the FOX line provide power ratings of 7.5W (FOX6), 12W (FOX12), 18W (FOX18) and 30W (FOX30) and cover output voltages of 5- to 48-Vdc in the standard portfolio.



Have a question?  We would like to hear it.
Either send us an email or give us a call and one of our Technical Sales Engineers will be happy to assist you.  It is Alcom electronics’ aim to keep its subscribers up-to-date with products, services and events related to their professional interest.
T4D - Tips For Designers - is a monthly e-news magazine which contains Hardware Electronic Component & Application concepts for electronics engineers and design managers. T4D also features embedded Wireless - Display - Connectivity - Computing solutions for system designers & integrators.

Alcom Belgium - Singel 3 - 2550 Kontich

Tel.: +32 (0)3 458 30 33 - Fax: +32 (0)3 458 31 26 -


Alcom Netherlands - Rivium 1e straat 52 - 2909 LE Capelle a/d IJssel

Tel.: +31 (0)10 288 25 00 - Fax: +31 (0)10 288 25 25 -

Send to a friend >
privacy policy | Deze e-mail werd verstuurd naar | Uitschrijven - Profiel update