13 New 32-bit Devices in 3 Different Product Series Target a Broad Range of Applications Including Ultra-Low Power, High-Speed Communication, Security and Capacitive Touch

The award-winning AVR UC3 microcontrollers (MCUs) feature high performance, digital signal processing (DSP) instructions, USB connectivity, secure encryption and capacitive touch support. In addition to new devices in the existing UC3 L and UC3 A Series, a new UC3 D Series of MCUs is now available.

The AVR UC3 Device Series

The AVR UC3L— the Ultra-Low Power 32-bit Microcontroller
The AVR UC3D — Entry-level 32-bit for Consumer Applications
The AVR UC3A4 — When Speed Meets Security
Read more

The CMX7261 is capable of encoding analogue voice to PCM (Linear, µ-law or A-law), CVSD, G.711 or G.729A data formats and decoding PCM, CVSD and G.729A to analogue voice. It can also transcode data between PCM, CVSD and G.729A formats. The device features built-in G.711, G.729A and CVSD algorithms and embedded Analogue to Digital and Digital to Analogue conversion. Read more

Nuvoton introduced the ChipCorder® ISD2100, the industry’s first true single-chip digital audio-grade IC, enabling industrial and consumer product makers to quickly and economically brand their designs with audio-grade digital playback of voice and/or music. The highly integrated ISD2100 reduces overall product costs and conserves designs’ “real estate through its ability to operate independently of a microcontroller, along with its built-in digital compression, flash storage for non-volatile audio playback of up to 60 seconds, a speaker driver, and digital audio signal paths. Datasheet: ISD2100

PLX expanded its TeraPHY® 10GBase-T PHY family with three new single-, dual- and quad-port integrated transceivers. Designed on a 40-nanometer lithography node, these devices represent the fourth generation of PLX 10GBase-T PHYs and its second generation in 40nm. Low power dissipation is crucial in today's data centers and PLX's upgraded TN8000 PHY devices require only two watts for 10-meter distances over standard copper cabling, which is a popular networking length. PLX TeraPHY products automatically determine the length of a cable and only use the necessary power to reach that distance. Another key feature includes Enhanced Energy Efficient Ethernet (eEEE) for both 10 Gigabit and Gigabit speeds -- this PLX customization of the IEEE 802.3az standard implements special low-power idle modes, resulting in lower costs and further contributes to saving the environment.

Product brief TN8000 10GBase-T PHY Family
Overview 10GBase-T PHY Products

The C8051F96x family is the lowest power, most advanced MCU solution for power sensitive embedded systems used in battery-powered and green energy applications. The C8051F96x family has been designed from the ground up to seamlessly interoperate with Silicon Labs’ EZRadioPRO® sub-GHz transceivers.

The Si102x/Si103x wireless MCU family pairs the ultra-low-power C8051F96x MCU core with the Si443x EZRadioPRO transceiver into a single-chip solution. It addresses the requirements of low-power embedded systems requiring an RF link. By reducing overall system power, these devices enable developers to either reduce the size/cost of batteries or increase battery life while delivering end products with industry leading RF performance.

Supertex introduced HV2733, a sixteen-channel, high voltage, analog switch with integrated bleed resistors. It is well-suited for applications where low voltage signals control high voltage switching, such as in medical ultrasound imaging, metal flaw detection through non-destructive testing (NDT), optical MEMS modules, and piezoelectric transducers. Datasheet: HV2733

Bridgelux announced its latest generation of industry-leading LS, ES, and award-winning RS product families, delivering an increase in efficacy of up to 30% and a reduction of up to 30% in cost per lumen compared to previous product generations. Featuring the largest portfolio of LED arrays in the lighting industry, Brid gelux offers products for lighting applications ranging from the light output equivalent of a 20-Watt decorative lamp to that of a 300-Watt high intensity discharge (HID) city streetlight. Overview

The EA DIP180B-5NLWTP display module from Electronic Assembly was designed for use in industrial controllers. The EA DIP180B-5NLWTP is a full-graphic display with a resolution of 180 x 32 pixels; alphanumeric characters are displayed as graphics. The touch panel is linked to an external touch pad controller, or a controller with analogue inputs. The module provides a high level of contrast and fast response times thanks to the use of an LCD supertwist display. Even at extremely low operating temperatures of -20 degrees Celsius, the display's response time is still a sufficient 2.5 sec. Datasheet

Acriche 2 represents long life time, low energy consumption and design convenience. Seoul Semiconductor announced 4W, 8W, 12W and 16W module launch which will provide bulb replacement LED solution replacing not only 40W, 60W and 100W incandescent bulb but also MR16 halogen lamp and down light.

Why Acriche 2 ?

• Lifetime X more than 2 : eliminates high failure rate capacitors required in traditional converter topologies.
• Power consumption X less than 1/2 : features higher power factor and better efficiency than traditional AC designs
• Design flexibility X 2 : provides more heat sink design options by eliminating the AC/DC converter

Application Note

The fast-acting CB61F Series of SMD Brick™ fuse provides high breaking capacity performance in a CQC Approved SMD package. The CB61F Series offers 125Vac/50A and 125Vdc/300A protection up to 15 amps, which is among the highest in its class.

Features:
• Halogen free, lead free and RoHS compliant
• High Interrupting Ratings: 50A @ 125Vac / 300A @ 125Vdc
• Wide selection with ratings from 2 to 15 amps for applications requiring fast-acting performance
• CQC approvals to meets the growing market demand
• cULus Certified and PSE Level 1 Certified
• Solder immersion compatible

Datasheet: CB61F

ept's Colibri® connector is a shielded, 2-row, SMD interconnect system in 0.5 mm pitch. Both connectors, Plug and Receptacle, will be available with 8 mm stacking height and 220 pins. They are designed to meet requirements according to specifications not only of PICMG COM Express®, but also of SFF-SIG Core Express® and nanoETXexpress. Additional versions with flexible pin count as well as multiple stack heights will be available consecutively.

Applications :

• High density board designs
• COM Express®
• CoreExpress®
• Board-to-Board
• Mezzanine Add-on Cards
  

Product Brief

ProTek Devices introduced the ultra low capacitance, (typically 0.4pF) GBLLC03 and GBLLC03C series transient voltage suppressors. These devices are designed to protect applications such as wireless telecommunication devices, PCMCIA cards and portable electronics such as PDAs and digital cameras. This series is available in a unidirectional and bidirectional configuration with a working voltage of 3.0 Volts. Rated at 200 Watts peak pulse power using an 8/20µs waveform, this series should provide sufficient protection for tertiary type lightning threats at key interface locations. Datasheet: GBLLC03(C)

2,4 / 5Ghz 10 / 15 dBi Panel Antenna

WLAN Directional Antenna (CPE) is WiFi signal extender that extends the signal range while you are in a house or a building. You can just only install one in the building, then all the users in the building can receive and experience a very good signal strength of the WiFi environment.

Product Brief
RF Antenna Selection table incl GPS / Combo / GSM/3G/WiFi Multiband

Former ERA transformers, acquired by Pulse Electronics stops production of its Encapsulated 50/60 Hz transformers.

Switch to Marschner now !

Marschner offers a complete range of standard or special designs manufactured according to customer specifications.

Product Overview

The transformers of the EI30 series have been especially developed for power and voltage supply in devices, in which a reduced power input is desired, or to which directive no. 1275/2008 applies. The energy-using products (EuP) law says that starting in 2013, a power loss of < 0.5 W in standby and offine status will be provided for electric and electronic offce machines and household appliances.

Advantages:

* compact design with power range up to 2.8 VA
* minimal height, low power loss
* inherently short circuit proof
* exellent temperature-change behavior owing to epoxy vacuum casting
* 100% unit checked with 4000 V PRI-SEC
* ambient temperature insulation class ta 40°C/B, ta 70°C/B,ta 70°C/F
* highest safety and lifetime
* VDE, UL, CSA, ENEC10 approvals
* split bobbin, two chamber winding
* high surge capability
* self-extinguishing case material
* optimal for PCB mounting

Overview