... Electro Mechanical Components
|
|
Highlights the latest technology in Inlets, Inlet Filters, Solid State Devices,..
|
Contains innovative product news for the Embedded Electronic Designer community
|
| Compact Power Entry Module for PCB Mounting |
 |
| |
 |
|
DA22, SCHURTER’s latest power entry module (PEM) is built compact and provides maximum electrical power density. The unit offers optimal EMC filter performance, features
built-in overload protection and ensures resource-saving mounting. The DA22 product line, specifically designed for PCB mounting, combines an IEC appliance inlet, a
fuse and a filter into one unit. Pre-wired, this product requires only minimal PCB space and can be mounted with very little time required for wiring. This new PEM integrates EMC filtering and shielding directly at the point of power entry, which has an optimal effect on electromagnetic compatibility. Overload protection is provided by a 1-pole or 2-pole fuseholder for 5x20 fuse links.
The unit is screwed onto the appliance chassis’ wall from the inside, the screw-on connection with the printed circuit board ensuring optimal mechanical safety. DA22 is rated for currents up to 10 A at 125/250 VAC. The entire product line is ENEC and cURus approved and meets the requirements for appliances according to IEC 60950. The versions featuring Extrasafe fuseholders and medical appliance filters are ideally suited to medical appliances according to IEC 60601-1. Datasheet: DA22
|
 |
| Making power distribution assemblies easy,quick and safe |
|
| |
 |
|
The 6610 is the first of its kind appliance outlet using IDC terminal technology. This novel product allows significant reduction of labour costs by supporting a more efficient assembly method. Multiple outlets can be banked and wire connections can be bussed, connecting the terminals all at once. The product is especially suited for power distribution units and appliances with multiple power outputs. The IEC F appliance outlet is equipped with IDC terminals and available for two different wiring versions, “along and “across to the connector pin axis. The terminals accept insulated solid wires with cross section AWG12 / 2.5 mm2 and AWG16 / 1.0 – 1.5 mm2. The component is designed for snap-in mounting and comes with a protection cover. The cover aids in pressing the wires and, at the same time protects from electrical shock. Special versions with an individual quick connect or solder line terminal are available.
- Appliance outlet F according to IEC 60320 with IDC terminals
- Cross sections: AWG12 / 2.5mm2 or AWG16 / 1-1.5mm2
- Snap-in mounting for panel thicknesses 0.8 mm – 3.0 mm
- ENEC & cURus approvals for 10 A / 15 A at 250VAC (AWG 16 version not UL approved)
Datasheet: 6610
|
|
| |
|
|
|