* Up To 30% Smaller Package Size
* Safety Approvals to EN60950
* Universal Input of 85-265VAC
* Active Power Factor Correction
* Single Outputs from 5 to 24VDC
* 3,000V Isolation

Designed to meet the space and performance needs in low- to moderate-power systems and instrumentation applications, Astrodyne announces the PMK-150 line of high density open frame switching power supplies that provide output power of 150 Watts with active PFC. All models accept universal input from 85-265VAC and 4 models are available that provide single outputs from 5VDC to 24VDC. The PMK-150 is fully approved to EN60950 safety specifications. Utilizing high density SMT construction, The PMK-150 offer dramatically reduced case sizes that are up to 30% smaller than products with similar output power and provide power densities of up to 4 Watts/cubic inch. All models in the PMK-150 feature an integral power-good LED indicator and output adjustment potentiometer and will operate over the ambient temperature range of -10 to +50 DegC without forced cooling or output power derating. All models contain overvoltage, short circuit protection, and integral input line filtering. Dimensions are 5.5"L X 3."W X 1.5"H and all models feature screw terminal input/output connections.

Datasheet PMK-150

With the burgeoning market for medical apparatuses, designers have become more familiar with the particular compliance standards required. However, advances in technology have led to changes in standards that will continue to significantly affect the power-supply designer and system integrator.New standards are being proposed that would change the medical-device approval process, literally turning the current method upside down. These new standards would change the method of approving medical equipment from simple parameter testing to an involved collaboration of risk declaration and the methods applied to identify and minimize those risks.

Astrodyne medical power supplies 

Designed to meet the space and performance needs in low- power telecommunication, industrial control and embedded systems applications, Astrodyne announces the PV15 line of high density enclosed switching power supplies that provide 15 Watts of output power. All models accept universal input from 90-264VAC and 5 models are available that provide single outputs from 5VDC to 48VDC. All models feature integral EMI filtering for EN55022 Class B compliance. The PV15 Series models feature an integral power-good LED indicator and output adjustment potentiometer and will operate over the ambient temperature range of -20 to +50°C without forced cooling or output power derating. All models contain overvoltage and short circuit protection circuitry. Dimensions are 2.59"L X 1.98"W X 1.1"H and all models feature screw terminal input/output connections.

* 90-264VAC Universal Input
* Single Outputs from 5 to 48VDC
* < 1U Profile
* EN55022 Class B EMC

Astrodyne Product Overview

All ASL150 Series models accept universal input from 90-264Vac. Four models are available that provide single outputs of 5 to 48Vdc. The ASL150 modules occupy a small mechanical footprint measuring only 2" x 4" x 1.08", and the ASL150 series features efficiencies up to 90% with what the company claims is 30% less power dissipation than competing products. All models contain overvoltage, overcurrent and short circuit protection circuitry. All models feature Molex-style I/O connectors. The ASL150 series is fully approved to CSA/NTRL, NEMKO safety specifications. Medically approved non-commercial versions are also available.

Datasheet ASL150 Series

PWC, PWB 5W Series feature :

* Universal Input
* Suitable for peak current applications
* Smallest footprint

Datasheet

New BIAS BPS Series micro switching power supplies are the world's smallest, most efficient low-power switchers. With wattages from 1/2 to 2 watts, there is a Bias supply that is a good match for your low-power or standby application.

* Ultra-compact, 1/2, 1 and 2 watt models
* Up to 75% efficiency- EPA efficiency award winner
* Patented design eliminates EMI without filtering
* Less than 30mW no-load
* Ready-to-apply standby and low-power solutions
* Recognized per IEC60950
* Meets or exceeds EN55022 class B and FCC Part 15 class B
* CB Test Certificate Number US/7104B/US
* UL File Number E210855

Overview Low Power AC-DC  

Features:

• AC/DC Din Rail mountable
• 3 phase
• Compact design
• High efficiency up to 93%
• Parallel function
• Universal input voltage
• Output Voltage 24 or 48 VDC

Datasheet WRA960

U series of single output SMPS with PFCThe U series of switching power supply are available in models from 600 to 1500 watts. It features durable design that installs easily in compact spaces, 0.98 typical of power factor, high reliability and low ripple noise, built-in remote sense function, remote ON/OFF control and power good signal output, programmable output voltage, forced current sharing at parallel operation(N+1), output short circuit, over voltage, overload, over temperature protections.

Product Overview

Characteristics :
* Low leakage current =< 10µA or =< 100µA
* Universal input 100 - 240 VAC
* EMC conformity
* Exact termination of the respective charging cycle
* Interchangeable primary adapters
* Light weight and compact size
* Green LED indicator
* Continuously short circuit proof
* Worldwide use
* Low standby power

Applications :
* Inhalers
* Measuring instruments
* Laboratory equipment
* Patient lifts
* Patient monitors

Friwo develops the most optimum open frame solution according to your demand. The power module is taylor made so designed and produced according to your mechanical and electrical specifications. Applications: set-top boxes, safety technology, vending machines, medical equipment and many more. 

Datasheet: Open Frame

FRIWO introduces the new GPP10 Office & Medical platforms. These new platforms combine latest design with established FRIWO quality in a small housing and at an attractive price. The medical version has a green LED for indication. FRIWO is particularly proud of the new primary plug system which conforms to all important standards. Presently, the UK adapter is the only one on the market which fully meets the UK standards.  The protection of the environment and its resources is important to FRIWO, therefore the GPP10 today already fulfils the high Energy Star requirements.

GPP 10 Office
GPP 10 Medical

Friwo introduced the new DTC 60 (DTC = DeskTopCharger). This new NiCd / NiMH charger combines latest design with FRIWO quality – at an attractive price. The DTC 60 meet already environmental health standards which are not yet in force.

Technical Details:
*AC Input: 194 to 264 VAC   (50 to 60 Hz)

Version 1 (P/N 1890704) DC Output: 
* capacity 1.0 to 20.0Ah  
* current 2600 Ma
* cells 4 to 12

Version 2 (P/N 1890132) DC Output:      
* capacity    1.0 to 20.0Ah                        
* current      1800 mA                        
* cells         10 to 20

This new power supply will soon replace our current platform and combines the latest designwith our established FRIWO quality. Compared to the previous PP8 platform the new one offers the following advantages:
• Improved electrical design
• Housing fixed with triwing screws
• Higher robustness
• Short-term availability

Datasheet: PP8

Hengfu products range from 5W to 1,000W AC/DC, DC/DC standard, modified and custom-design switching power supplies, including more than 2,000 models showing great flexibility. About 40 product series have acquired UL & CE approval and more are underway. Presently, Hengfu is the only Chinese manufacturer with such a complete range of safety approvals. Hengfu has 15 years experience specializing in design and manufacture of switching power supplies.

Product Overview

The MPA500R series combines 500W of output power with compact size and robust performance. These AC/DC switchers include a universal 90 to 264 VAC input, active power factor correction, full safety approvals and robust filtering. These high performance, industrial power supplies are ideal for a variety of applications requiring compact construction, high power density, and low cost. Seven standard models operate from a universal input of 90 to 264 VAC, providing tightly regulated single outputs. All models are protected for over load, over voltage, over temperature and short circuit faults. Interface signals for Power Good and Remote On/Off are provided, as well as a driver output for an external fan. As an option, models are available with current share capability. The MTBF (per MIL HDBK 217F) of the MPA500R series is greater than 150 khours.

Datasheet: MPA500R