New graphic display 192x160 dots

In order to continuously develop new standard display CCT introduced the G1619x01. This is a full graphic display 192x160 dots with a new controller Sitronix ST7524 TAB, the viewing area is 65x55mm. The advantage of this module is to offer a high resolution at an interesting price. The module offer a large image area 90x80mm and a very good contrast and wide viewing angle. The G1619x01 is available in STN and FSTN version, with positive and negative mode. The backlight is yellow green, but White backlight is under development.

Datasheet: G1619x01

New friendly priced chip on flex module for many applications

General specification G1619x02 series:

Display format: Graphics, 160 (H) x 192 (W)
Pixel size: 0.30 (H) x 0.30 (W) mm
Pixel pitch: 0.32 (H) x 0.32 (W) mm
View area: 55.0 (H) x 65.0 (W) mm
Active area: 51.18 (H) x 61.42 (W) mm
General dimensions: 67.0 (H) x 80.5 (W) x 5.1 (T) mm (excluding FPC)
Various backlight colors available
Controller/Driver: ST7529 TAB or equivalent
Interface: FPC ZIF-end connector, Parallel Interface

Datasheet: G1619x02

Most brilliant graphic displays

The super bright backlight is extreme even and available in various different colours. Also a RGB backlight is included. The contrast and viewing angle of the STN and FSTN displays is without any reproval. More than that: the unbelievable compact design and the integrated graphic controller with SPI interface makes it straightforward. The displays will be soldered direct onto a pcb, and for programming there are ready made character sets and some routines for initialisation available. Furthermore there is a testboard for easy USB connection and a gratis simulation software for Windows on hand. Outstanding is the low current consumption of 150~350uA only at single supply +3.3V (depends on display size). There is no additional voltage needed. Datasheet: DOGM128

3,5 and 5,7 inch TFT Panels with extended temperature range

Both displays are compatible and are available with or without touch panel. These displays come in a temperature range from -20°C to +70°C and are backlighted by a long-life LED backlight. Interface is a 24-bit RGB for graphic controller interface. The 5,7 inch TFT runs from a single 3,3V supply, so no additional power is required. The contrast ratio of the display is 1:250 while brightness is 380 Cd/m²

Features 3,5 inch
Features 5,7 inch

Now available with 2.9 inch Touch

The new bigger EA DOGL128-6 Modules from ELECTRONIC ASSEMBLY with 128x64 dots now can be used with the EA TOUCH128-2. This is a 4-wire resistive Touch with a self glueing backside to stick it directly to the display surface. For the connection it has a 4-pin flexible cable FFC with a pitch of 1.0mm and a length of about 25mm. On these 4 pins 4 electrodes along the sides „left“, „right“ and „top“, „bottom“ are connected. A fitting ZIF connector can be supplied also. Datasheet: EA DOGL128-6

132x64 Cholesteric Display Module with LCD controller


		The new Graphic Display Module delivers maximum image information content flexibility in an extremely compact form factor. It is one of the most compact and cost efficient bi-stable graphic displays available today. All Kent Displays Cholesteric Liquid Crystal Display (ChLCD) products take advantage of the technology’s unique “No Power” attribute without compromising superior optical performance even in direct sunlight. The Chip-on-Flex (COF) driver IC includes an LCD controller and a DC/DC charge pump. System integration requires only an external microcontroller for sending commands to the LCD controller and external capacitors for use by the built-in charge pump. Datasheet: 132*64 display module

... Standard / Custom Displays

Highlights the newest LCDs, Ch LCDs, OLED and Intelligent Displays

Contains innovative product news for the Embedded Electronic Designer community