CCT developed two new products:

G2432W31xxxx0
- Available in all LCD mode, STN and FSTN
- Compatible with popular Hitachi 5.7" model
- Full bezel covering the module
- High brightness white LED backlight
- Module dimension - 167mm x 109mm
- Viewing area - 122mm x 92
Datasheet: G2432W31NBN10

G2432W32xxxxx

- Cheapest 5.7" solution
- Available in STN mode
- DC-DC optional
- High brightness white LED backlight
- Module dimension - 160mm x 109mm
- Viewing area - 122mm x 92mm
Datasheet: G2432W32SBN10

This newly developed 64x128 module, G64128W17BBN00, is designed for many industrial type applications. The G64128W17BBN00 offers a lower VLCD (8.8V typical) compared to the existing G64128x01. Mechanical and functional are both modules similar.

Features:

* Display format: 128 (W) x 64 (H) dots
* Outline dimensions: 93.0mm x 70.0mm
* Viewing area: 70.7mm x 38.8mm
* LCD type: FSTN
* Polarizer mode: transflective
* Backlight: various LED color options
* Build in controller/driver: S6B0108A01COCX and S6B0107B01-COCX

Datasheet: G64128W17BBN00

Now the first 5.7“ displays with integrated intelligence is available. The 8 soft fonts and more than 130 integrated graphic functions do give a preview of tomorrows graphic programming. There's no more need to be firm in any programming language. Everybody is able to benefit for a modern graphic display now. It is absolute easy to use various fonts, to draw a line, place a picture, draw a bargraph and to create a pull-down menu.Connection is be done via one of three built-in interface RS-232, SPI and I²C bus. Power supply is simple +5V. Displays are available in blue-white, black&white and amber. All of them are good for an operating temperature range of –20..+70°C; automatic temperature compensation is also built-in.

* Touch panel incl. Controller
* RS-232 + I²C-Bus + SPI
* character sets & graphic functions
* 320x240 - 1/4 VGA 5.7" + 240x128
* single supply +5V
* T op. -20..+70°C

This new display series was specially developed for low-power hand-held applications. For the first time it is possible to operate a standard display at 3.3V! 5V operation is for the character displays also possible. The optionally available LED backlighting can also be run with 3.3V or 5V depending on the connections.
* HIGH-CONTRAST LCD SUPERTWIST DISPLAY (STN AND FSTN) WITH 15µA DOT GAP
* OPTIONAL LED BACKLIGHTS IN DIFFERENT COLORS
* 128x64 PIXELS (CORRESPONDS TO 8x21 CHARACTERS OR 4x10 LARGE CHARACTERS)
* ST 7565R CONTROLLER WITH SPI (4-WIRE) INTERFACE
* POWER SUPPLY: SINGLE SUPPLY 3.0V TO 3.3V (TYPICALLY 150µA)
* NO ADDITIONAL VOLTAGES REQUIRED
* OPERATING TEMPERATURE RANGE -20°C TO +70°C (STORAGE -30°C TO +80°C)
* LED BACKLIGHTING 5mA TO 45mA
* NO MOUNTING REQUIRED: SIMPLY SOLDER ONTO PCB  

Datasheet DOGM Graphic Series

The new graphics displays from DOG-series provide a resolution of 128x64 dots. The mechanical mounting as well as the electrical contact is done via the 26 pins, pitch 1/10 inch. Simple and reliable. Connection is done via serial interface SPI. Data transmission rate is up to 20MHz without any busyflag operation.The displays have very compact outline dimension of 55x46mm and an extreme narrow edge. There's a low-power graphics controller built-in already. The modern chip design leads to a power consumption of 150uA only (single supply 3.3V). There is no additional voltage required and contrast is held steady over unsteady supply voltage and ambient temperature automatically. Contrast adjustment is done via software control. Operating temperature range is from -20 up to +70°C.
Datasheet: EA DOG series

This new display series was specially developed for low-power hand-held applications. For the first time it is possible to operate a standard display at 3.3V! 5V operation is for the character displays also possible. The optionally available LED backlighting can also be run with 3.3V or 5V depending on the connections.

Advantages
• compact at 55 x 31 mm at a font size of 5.57 mm (2x16)
• new: 128x64 with 55 x 46 mm, 3.0..3.3V, SPI
• new: 132x32 with 55 x 31mm, 2.4..3.3V, SPI

Datasheets:
DOGM-128e
DOGM132-5
DOG-ME
overview

ELECTRONIC ASSEMBLY exceeds its standard product range with a new member of the established DIP-Module family. The new one EA DIP180B-5NLW is a blue-white 180x32 graphic module. It is distiguised by a famous contrast and a super bright LED backlight with low power of max. 45mA. Thanks to it's compact design (viewing area 88x19mm, outline dimensions 102x27x11mm) this graphic display is perfect for usage in 19“ rack with a height of 1 unit only or other cases with less height.
More features are: very even backlight, super fast response (even at -20°C), as well as automatic temperature compensation and a built-in controller AX1520.

Datasheet: EA DIP180 

Kent Displays is dedicated to cholesteric displays (ChLCD), taking advantage of their low-power requirement and reflective features to bring the world greatly improved displays for portable devices. These devices demand long battery life, a wide viewing angle and paper-like viewing in all ambient light including bright sunlight.
- Active diagonal viewing dimension from 2.2 in. to 12.1 in.
- Resolution from 128 columns x 32 rows to 640 columns x 480 rows.
- DPI values from 20 to 127.

NO POWER
SUNLIGHT READABLE
WIDE VIEWING ANGLE
HIGH BRIGHTNESS AND CONTRAST

Overview ChLCD Display Modules

RiTdisplay offers a large range of mono OLED display, single color Blue, Yellow, White and Red. Also a combination of colors in one display is possible.
For color applications RiTdisplay can support 1.0, 1.3,  1.5, 1.8, 2.2, 3,2 inch color displays in the following resolutions: 220x176, 128x160, 160x128, 93x64 and 256x64.
RiTdisplay develop OLED Displays which have a wide viewing angle, fast response time, low power consumption, very compact and are high bright with an excellent contrast.

RIT overview