Filter Connectors are especially designed for industrial applications and are providing excellent protection against EMI and RFI. By using D-Subminiature standard components a cost-effective production can be achieved as well as a 100% compatibility with equivalent products according DIN41652, MIL-C24308 and IEC807F-2.

Features :
* Outstanding protection in the HF ranges in all directions
* High mating cycles
* Contacts available in different quality classes
* Available in SMD technique

Overview Deltron Filter Connectors

EPT and Harting have jointly developed power connectors for MicroTCA and AdvancedTCA. The principal aim of this cooperation remains the joint development of mechanically and electrically identical connectors to clearly defined standards of quality.
Products :
* MicroTCA Connector
* MicroTCA Power Backplane Connector
* MicroTCA Power Module Output Connector
* AdvancedTCA Connector
* AdvancedTCA Female Connector
* AdvancedTCA Male Connector

Features

The MicroTCA™ specification describes the power module, which is connected at the rear with the bus board by a new power connector. After lengthy discussion in the PICMG consortium, it was decided to include two “footprints” in the specification for the “Power Backplane” connector. This addressed the problem that one of the two footprints is protected by patent. ept therefore played a major part in developing an additional footprint for inclusion in the specification. It is not protected by patent and is therefore freely available.  This "MicroTCA™ Power Connector" is a combination of the familiar hm2.0-8 connector with 72 signal contacts and a UPM power component, which is now of two-row pattern with 24 power contacts. This combination permits a load of up to 12 A per pin.  ept supplies this power connector with the reliable ept Tcom press-fit technology; since an open standard is used, other companies are able to enter the market as a second source of supply.

Features and characteristics

The LPZ series of Honda Connectors achieves the world's smallest stack-height 0.7 mm ultralow-profile, space-saving 0.3 mm pitch stacking connectors. Thereby, these connectors contribute to the development of significantly thin products and to the reduction of mounting surfaces on a PCB.

Specifications:
- Stack height: 0.7mm
- Contact pitch: 0.3mm
- No. of contacts: 32, 40 (24,60)
- Rated current: 0.25A
- Rated voltage: 50V AC (r.m.s.)
- Temperature range: -55 to +85C celcius
- Delivery from: Embossed tape

Datasheet: LPZ series connectors

* Compatible to PCI Express Mini Card Electromechanical SPEC
* Available with fixing latch for the whole connector and module. Latch has an operating portion on both ends for module ejection.
* Two types of module mounting heights are available. Stand-off product is able to compile items under 1.8mm lower module compile height.
* Connector and latch are compatible to automatic mounting. Packing form is an embossed tape

Datasheet MM60
JAE Connector Selection Guide

PRECI-DIP is providing standard internal interfaces for M8 and M12 round connectors, which are currently used in industrial automation. In addition, PRECI-DIP is offering the possibility to customize the interfaces in order to make a fully integrated body solution creating a direct I/O bottom entry. This is often used to connect various industrial sensors and panels. The customization can involve orientations, contact sizes for power applications, and patterns. In some cases, transparent plastics can be used to have lighting function in combination with a LED system.
General specifications:
- Maximum rated voltage: 60 volts (M8) - 250 volts (M12)
- Current rating per contact: 4 amps 
- Minimum mechanical life: 50 cycles
- Maximum operating temperature: 125°C

Product Brief

With the new pin header series 755 and 756 W+P PRODUCTS offers new space saving solutions, which are characterized by a high mating reliability and a flexible choice of the pin length. They ideally allow the application in systems requiring small space for the plug in process and high standards for safe connections; e.g. in medical technology and industrial control technology. The pin headers are realized with a 1,27 mm pitch and an insulation height of 1,9 mm. The contacts consist of round pins with a cross section of 0,42 mm, they are available as gold or tin plated versions. The pins can be ordered in customer designed lengths from 8,0 to 20,3 mm. The insulators consist of high temperature resisting LCP and are suitable for a leadfree soldering process according to the JEDEC/JSTD020C. A safe function is guaranteed in a temperature range from -55 to +125°C. The new pin header series can be delivered as single row, double row or sandwich version with 1-50 or 2-100 contacts, straight or right angled. As corresponding counterpiece W+P PRPODUCTS offers the female header series 155.

Datasheet: 755

W+P PRODUCTS presents the pitches 1.0, 1.25 and 1.5 mm as wire-to-board connectors in surface mount technologyTo optimize space and mounting time W+P PRODUCTS enlarges the wire-to-board connector programm with new SMT versions in small pitches: 1.0, 1.25 and 1.5 mm. Equiped with a pick & place pad they are perfectly fitting for automatical assembly in applications with limited space resources, as e.g. in systems of measurement and control technology, consumer electronics and medical devices.

Datasheets: 5110 5111 5630 1250 5690

With a mounting high of only 2.3 mm the female header series 6062 of W+P PRODUCTS offers new possibilities for compact stacking of printed circuit boards. The double row female header is available with 1.27 x 1.27 mm pitch as  SMT-version and is equiped with a Pick-&Place-Pad  for automated placement.

Datasheet: W+P 6062